Valleylab SurgiStat II

Description

 

Valleylab Surgistat II Descriptions

 

For general electrosurgery needs in the office, clinic, or emergency room, the Valleylab SurgiStat™ II generator provides exceptional performance, reliability, and safety benefits in a compact, easy to use unit.

 

 

 

• Easy and quick to set up; compact and light
• Saves time with automatic access to previously used power settings and modes
• Provides precise surgical effect with power control dials
• Performs most common office-based electrosurgical procedures
• Provides ability to change power settings while activating the generator
• Includes both monopolar and bipolar outputs
• Accepts preferred accessories:
• standard 3-pin pencil, most standard footswitching devices (with adapter), and standard Valleylab monopolar footswitch (optional)
• standard 2-pin bipolar footswitching devices
• Manufactured to the highest standards of quality in electrosurgical technology
• Ensures consistent clinical performance over a variety of procedures
• Increased patient safety with a return electrode contact quality monitoring system (RECQMS). The RECQMS system continually monitors patient impedance levels and deactivates the generator if a fault in the patient/return electrode contact is detected

 

 

Dimensions

• Height: 14 cm (5.5 in)
• Width: 26 cm (10.25 in)
• Depth: 25.4 (10 in)
• Weight: <6.5kg (<14 lbs)

 

RF Leakage

• Bipolar <39 Arms
• Monopolar <150 Arms

 

Input Power

• 110-120 Volts at 60 Hz

 

PER = 86

• PER (Power Efficiency Rating) is the measure of an electrosurgical generator’s ability to accurately deliver the selected power into a wide range of tissue types.

 

Controls and Indicators

• Mode Selection: Separate pushbuttons select modes (Cut or Blend, Desiccate, Fulgurate, or Bipolor)
• PowerSetting: Dials adjust power in increments of 1 watt
• Audible Tones: A continuous tone indicates activation; volume control is on the back panel. A dual tone, which is not adjustable, indicates an alarm condition; for example, compromised patient return electrode contact

 

Receptacles

• Front Panel: RECQMS patient return electrode receptacle (RECQMS system requires a split plate patient return electrode)
• Receptacle for standard footswitching devices with adapters
• Receptacle for standard 2-pin bipolar footswitching devices

 

Rear Panel

• Receptacle for standard Valleylab monopolar footswitch

Additional information

Manufacturer	COVIDIEN VALLEYLAB
Name	SurgiStat II
Part Number	SurgiStat II
Specialty	Operating Room
Maximum Cut Power	120 Watts
Product Type	Electrosurgical Units
Cut Frequency	357 kHz
Cut Modes	Cut, Blend
Maximum_Coagulation_Power	80 Watts
Coag Frequency kHz	475 kHz
Coagulation Modes	Desiccate, Fulgurate
Bipolar Output Power	30 Watts
Bipolar Frequency	520 kHz
Type	Standard
Return Electrode Monitoring	REM