Conmed Saber 2400

Description

Conmed Sabre 2400 Specifications

 

General

• Pure Cut
• Max Power: 300 W.
• Max. P-P Voltage: 2000<./li>
• Load (ohms): 300.
• Crest Factor: 1.8.
• Blend Cut
• Max Power: 180 W.
• Max. P-P Voltage: 2200.
• Load (ohms): 300.
• Crest Factor: 2.5.
• Coag
• Max Power: 120 W.
• Max. P-P Voltage: 9000.
• Load (ohms): 500.
• Crest Factor: 7.0.
• Bipolar
• Max Power: 50 W.
• Max. P-P Voltage: 280.
• Load (ohms): 50.
• Crest Factor: 1.5 – 12.1.

Dispersive Electrode Monitor

• With a dual foil dispersive electrode, the Aspen Return Monitor will alarm above 150 ohms, below 10 ohms, and with a 20% increase in resistance above set point. With a single foil dispersive electrode, a two-wire continuity detector alarms at 10 ohms and above.

Operating Frequency

• Cut: 416.7 kHz ± 0.01%.
• Coag: 416.7 kHz ± 0.01%.

Pulse Repetition Frequency

• Blend: 20.0 kHz ± 0.01%.
• Coag: 25.0 kHz ± 0.01%.
• Bipolar: 20.0 kHz ± 0.01%.

Input Voltage

• 104-127 VRMS, 50/60 Hz, calibrated at 120V.

Input Current

• Pure cut at 300: 7.0A max.

Line Frequency Leakage.

• Patient connections to neutral: < 25 μA.
• Chassis to neutral: < 25 μA typical.

RF Leakage Current

• Less than 100 mA (200 ohms to ground).

Power Decrease

• 1% typical. Pure cut set to 150 watts for 20 seconds.

Weight

• 32 lbs (14.5 kg).

Dimensions

• 6.75″H x 14.25″W x 21.5″D (17.1 x 36.2 x 54.6 cm).

Additional information

Manufacturer	CONMED
Name	Saber 2400
Part Number	60-5600-002
Specialty	Operating Room
Maximum Cut Power	300 Watts
Product Type	Electrosurgical Units
Cut Frequency	416.7 kHz
Cut Modes	Pure, Blend
Maximum_Coagulation_Power	120 Watts
Coag Frequency kHz	520 kHz
Coagulation Modes	Coag
Bipolar Output Power	50 Watts
Bipolar Frequency	1,050 kHz
Type	Coag
Return Electrode Monitoring